50mm magnetic window screen exhaust vent
Print Profile(3)
Description
A1 enclosure external exhaust kit, for drill-free installation through window screens.
The inner and outer parts are the same component, secured with eight 19*5mm magnets (I bought 20*5mm magnets, but the tolerance was too large, and they measured only 19*5mm; if you need 20mm standard size magnet holes, it is recommended to adjust them yourself in Bambu Studio using negative parts), with a small anti-loss lanyard hole to prevent the outer part from falling.
The exhaust pipe has an outer diameter of 50mm; the inner part can secure a 50mm corrugated pipe or connect a 50mm PVC pipe via a direct plug connector; the outer part can be directly exposed or have a 50mm PVC pipe compatible one-way valve installed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)