Adjustable Skadis spacer (no hardware)
Print Profile(2)
Bill of Materials
- Allen key 4mm x 1:
Description
Here is an adjustable spacer for IKEA Skådis boards.
It requires no additional hardware to assemble and mounts via a secure press fit.
Thread both pieces together and insert the spacer into the board.
If there’s still a gap between the spacer and the wall, insert a 4 mm Allen key through the hole and turn it to extend or retract the spacer.
If you use your own settings, make sure to apply the variable layer height to the threads so it runs smoothly.
22.01.2026
Added model measurements and 2 new longer screws: 16mm and 18.5mm
Height of the Base (excluding the connector): 14mm
Height of the Screw (Original): 14mm
Height of the new longer screws: 16mm and 18.5mm
I am testing out how good a plug would work to hide the hole of the spacer, stay tuned.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)