NASA Saturn V Kit Card
Print Profile(6)
Description
Boost Me (for free)
If you enjoy this model, your support is much appreciated!
The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.
This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.
Update 3/14/24 - Added a stand to display the Saturn V rocket that can be found here.
Notes
The antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.
Assembly
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (816)