Wall Hook | Coat Hanger | Towel Rack

Check out my newly released models:

Shower Wall Hook

Toothpaste Squeezer

----------------------------------------------—

My auto-locking hanger with its ribbed design has been well-received. I wanted to make a version without the mechanism, while keeping the design. This is a multi-purpose wall hook. It can be used as a towel or coat hanger. It can be used to hook bags and other heavy items as well.

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

Dimensions: 21.6 x 27.6 x 64.8mm (X, Y, Z).

There are 2 versions:
1- Double-sided Tape Mount: If you are using it for towels, or relatively light clothing this is a good choice. It's simpler to print and mount. There is a 16mm wide textured surface on the back. Thick & transparent double-sided tape adheres to that surface quite strongly. I would highly recommend thick transparent double-sided tape, thin or foam tapes won't be strong enough. Here is an option: Link to the double-sided tape.

2- Screw Mount: If you will be using it to hang bags or other relatively heavy objects, this is a better choice. It can carry quite a bit. The screw mount fits quite tightly into the hook. The entry diameter for the screw is 8.5mm. The exit diameter is 4.4mm. I would recommend inserting the mount into the hook a couple of times before mounting so that the edges are smoothed out. There is a small opening in the middle to help you separate the mount from the hook. You can use a pen or a tool to push the mount out.

----------------------------------------------------

Check out my other models:

Mini Bag Clip v2

Cable Organizer v2

Belt Hanger | Belt Hook

Clothes Hanger Connector Hook

S Hook

Mini Desktop Trash Bin - Fast Print (Vase Mode)

Pistachio Cup

Auto-locking Hanger (Ribbed)

Clamshell Box - 20+ Variants - 33gr Filament