Search models, users, collections, and posts
Parametrically customizable bathroom shower gel, body wash bottle wall mount
IP Report
This model is created by Parametric Model Maker
Make Your Model
Print Profile(1)
0.2mm layer, 2 walls, 100% infill
Designer
50 min
1 plate
Open in Bambu Studio
Boost
3
22
1
0
15
9
Released
Description
Content has been automatically translated.
🧴 Parametrically Customizable Bathroom Bottle Storage Hook, Small Size, Big Use!
✨ Model Highlights
- Parametric Free Customization: Supports three-dimensional adjustment of bottle mouth diameter/height/hook angle, perfectly adaptable to your shower gel, shampoo, hand sanitizer bottles, etc. (tested to fit common press-type bottle mouths, adjustable for diameters from 30-45mm), say goodbye to the trouble of 'generic models not fitting';
- Small Size, Low Filament Consumption: A single hook uses less than 20g PLA filament (print time <40 minutes), achieving bathroom storage upgrade at low cost, environmentally friendly and money-saving;
- Bathroom-Specific Design:
- The bottom of the hook has a reserved drainage groove to prevent water accumulation and bacterial growth, suitable for humid environments;
- The curved buckle fits the bottle's curvature, keeping it stable and preventing slipping, and the bottle does not shake when picked up or placed;
- The back has a reserved double-sided adhesive/suction cup mounting position (compatible with punch-free installation), capable of bearing ≥500g after pasting (approx. weight of 1 full bottle of shower gel);
- Iterative Optimization Results: After 3 design adjustments, it finally achieves 'minimum volume + strongest adaptability', not obstructing bottle labels after installation, combining aesthetics and practicality.
🖨️ Printing Suggestions
| Parameter | Recommended Value | Description |
|---|---|---|
| Material | PETG (preferred) / PLA | PETG is water and moisture resistant, more durable in bathroom environments; PLA is suitable for dry areas |
| Layer Height | 0.2mm | Balances detail and printing speed |
| Infill | 100% | Lightweight while ensuring structural strength |
| Supports | Minimal supports | |
| Post-processing | Optional edge sanding | Removes burrs for a smoother finish, preventing scratches |
💡 Usage Tips
- Parameter Adjustment Guide: After downloading the model, modify the 'bottle mouth diameter' and 'hook depth' parameters in the slicing software (it is recommended to first measure your own bottle size, then fine-tune ±2mm to ensure fit);
- Installation Method: Attach strong double-sided adhesive (3M VHB recommended) or a suction cup to the back, clean the wall surface before pasting (tile/glass surfaces are best), press for 10 seconds to ensure firmness, then let it rest for 24 hours before use.
⚠️ Gentle Reminder
This model is a bathroom storage tool; please do not hang excessively heavy items (e.g., bottles exceeding 1kg) to avoid the risk of falling~
💬 Interaction Invitation
If you print a perfect hook that fits your bottles, feel free to share photos and your parameter settings in the comments! If you have any questions about size adjustments or optimization suggestions, leave a message anytime, and let's make this small tool better understand your life~
Hope this hook helps you create a neat and organized bathroom corner! 🧼✨
(Note: Use with parametric design files for easy customization of your exclusive storage solution~)
(hashtags: #BathroomStorage #ParametricDesign #3DPrinted #MakerWorld)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)