Property of Ned Flanders Label

Property of Ned Flanders magnet / label

This model is free - no Leftorium visit required…

Prints in one piece. 

For those without an AMS, add in a pause between the white and black layers to manually change over the filament. If you have an AMS, it will print perfect without any changes to the profile.

Modelled from scratch.

There are 3 different design profiles available:

• The magnet - This profile has a 6x3 negative part added in the centre for a magnet to be placed in. If you have a magnet of another size, simply adjust the X and Y values to reflect the size of your magnet. The design is 4mm thick with the text added to the top of the base.
• The small - This is a thin label with text added on top. It is only small so that you can print many per plate. Will need glue or double-sided tape to attach to a surface.
• The large - This profile is scaled to as big as a 256x256 plate will fit. Usually will fit within the plate dimensions by more than 98%. The dimensions are larger all round. This is the best profile overall but the most expensive to print.

Check out my other designs if you like this one. Another Simpsons inspired design can be found here. A simpsons Logo:

https://makerworld.com/en/models/2180436-the-simpsons-logo#profileId-2366457