Squirrel Feeding Station with Camera outdoor 4

This extended feeding station for squirrels and birds combines a decorative bench with an integrated camera mount. The well-known bench feeding station is supplemented here with a branch featuring a camera compartment, allowing animal visits to be conveniently filmed and observed.

The camera (suitable for Blink Outdoor 4) is inserted from the back into a designated compartment and secured with a small clamp. An integrated canopy additionally protects the camera from weather influences. Visually, everything blends in like a natural branch in the garden or on the fence.

The construction consists of several individual parts that are printed flat and then glued together. All components have precisely fitting connecting nubs, making assembly simple and straightforward. The finished feeding station can be screwed or attached to a fence.

👉 Note: The original bench feeding station without a camera is also available.

https://makerworld.com/de/models/1849890-squirrel-feeding-bench-for-the-garden#profileId-1977262

Extended Information / Additional Information

• Suitable for Blink Outdoor 4 camera.
• Current files are prepared for larger printers (e.g., Bambu H2D).
• If there is enough interest, a version for smaller printers with further subdivided components will be provided.
• Assembly Recommendation:
  1. First, assemble the bench (legs + seats), flush with the back.
  2. Allow parts to dry thoroughly.
  3. Glue the middle and small branches.
  4. Connect this assembly to the large branch.
  5. Finally, glue in the canopy and inserts.
• Careful gluing is important for outdoor stability.