Harry Potter Castle Base
Print Profile(3)
Description
Here I created a base for the Harry Potter castle
I downloaded the castle here: https://makerworld.com/en/models/2000672-harry-potter-hogwarts-lighted#profileId-2154145
great model especially because it can be lit. To avoid having cables underneath, I thought you could put a nice base underneath. This way no cables are visible
This one is also lit and equipped with lithophane
I needed 20 LEDs: https://makerworld.com/en/models/2000672-harry-potter-hogwarts-lighted#profileId-2154145
A light for the lithophane: https://www.amazon.de/dp/B0FFT48WBF?ref=ppx_yo2ov_dt_b_fed_asin_title
To attach the lid I used 4 M5x12mm screws and put two M5 nuts on each screw. This way the screw wasn't too long and I also had a foot at the bottom
Of course, what you install is entirely up to you; that was just what I had left over from other projects
To get the LED to the correct height, I made a lit piece to find the correct lighting position in the model
I glued the lithophane and the 9v battery holder with hot glue
I have also attached the pictures; I thought I had already included them
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)