Heart in hands

Heart in my hands, made with HueForge

Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

The Model is 170x170mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.2mm and the Actual Thickness is 2.08887mm

    #0d100e PLA Spectrum Premium Deep Black  Transmission Distance: 0.1
    #8f93b3 PLA Spectrum Silver Star  Transmission Distance: 1.6
    #ffffff PLA Spectrum Premium Polar White  Transmission Distance: 2.5
    #df0413 PLA SUNLU Meta Cherry Red  Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
    Start with Deep Black
    At layer #5 (0.6mm) swap to Silver Star
    At layer #8 (0.9mm) swap to Polar White
    At layer #12 (1.3mm) swap to Deep Black
    At layer #16 (1.7mm) swap to Cherry Red for the rest.
 

Link for the frame: https://makerworld.com/en/models/775698-frame-for-hueforge-various-dimensions