Limit Semi Modular Insert _ Limit Semi Modular Insert

Limit Board Game Insert Organizer Guide

This model is an insert organizer specifically designed for the Limit board game.
It is designed with a semi-modular approach, allowing users to select and print module combinations according to their preferences and needs

For convenience, each module is categorized into Type A to H based on Plate Name.
※ If you are not using Bambu Studio, type identification may be somewhat difficult as you will need to differentiate based only on the images provided below

Overall Type Organization

6 Basic Country Boxes – Recommended Module Combinations

Combination ①

Type H + (Type D or Type G)

• Type H is 34mm tall, approximately the height of about 3 other modules.
• In the remaining space, you can place one of the two 9mm tall modules (D or G).
• The card slot can store 3 types of cards at once when using thin sleeves.
• Token arrangement can be done freely, and
  the right-side space of Type H can store all tiles that do not require separate classification

Combination ②

Type A + Type B + Type C + (Type D or Type G)

• Type A, B, and C are all 11.3mm tall.
• If you stack 3, you can add 1 of the 9mm modules (D or G) to the remaining space

International Box – Recommended Module Combinations

Type B + Type F + Type F + Type G

• Type B: Card and resource tile storage
• 2 Type F + 1 Type G: Dispersed storage for remaining tokens

Limit Box 1 – Recommended Module Combinations

Type E

• Dedicated for 20$ tokens / 50$ tokens
• 2-compartment token tray

Limit Box 2 – Recommended Module Combinations

• Type E × 2
• Type G × 2

Limit boxes generally have ample internal space,
so it's a good idea to store extra trays for use during gameplay

Notes and Additional Information

• The above combinations are recommended examples,
  and it is also possible to use a method where only one Type G is placed in each box to prevent tiles from spilling out.
• If not an overfit, thin sleeves can be used.
• When combining modules, it is recommended to place 9mm tall Type F / Type G at the very top of the box.
• At this time, if you arrange them so that the side clearance faces forward, as shown in the image below,
  it will be much easier when opening the box later