Surfboard Washer for Straps
Print Profile(1)
Description
I designed this washer for all common surfboard straps that use self-tapping screws.
The washer was printed in PETG with 100% infill for maximum strength and durability.
For printing, I used a high layer height, which worked very well.
Successful prints were achieved with both a 0.4 mm and a 0.8 mm nozzle.
Appearance was not a priority for this part, the focus was purely on strength and durability, which is why a high layer height and 100% infill were used.
I strongly recommend using PETG or, if possible, ABS to ensure sufficient strength and resistance to saltwater. PETG has been fully sufficient for my use, as I use these washers on my kitefoil and wingfoil boards.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)