mini gun, gatling gun - 26 inch big desk light.

Very big gatling - minigun desk light.

I know it's a large print but worth it.

The model is about 65cm long (about 26inch) and 25cm (10inch) hight.

It's also a fantasy model and not related to any model ore brand.

Under neath 4 from the six barrels is space to put a light strip in there, you need one from aprox 4 meter.

The ligt strip go's underneath up and in the barrel self back.

In the big frame is plenty space to put a power bank ore let the cable out  for adapter.

In the front between te barrels is space to let the sensor out for the remote control if you have (I use some foam to keep it in place, and there is plenty room for big ore small models of sensors).

In the frond of the barrels i put a compensator to cover the licht strip who is bent in the front and don't have to be glue on.

The trigger is red and just for show.

Just need about:

32 M5x12 hex allen key screws.

2x M6x12mm hex allen key screws.

1x nut M6.

1x bold M6x75mm.

Some super glue.

A small part of foam.

Light strip about 4 meter.

if need a power bank ore power adapter.

For the bolds you also can use small parkers ore glue.

The barrels and indicator, windows are glue on the site and front.

The back can be closed and open for a powerbank ore gifts.

The indication meter in the main frame are very thin so when you have light in the main frame they will light up as well and give a nice touch.