higly detailed demogorgon

From the cult series Stranger Things, I took this figure, adapted it, and put it into a pose. If you have ideas for other poses, write to me, and I will upload them. This is an exclusive fan art figure, inspired by the Demogorgon from the successful series Stranger Things. The model is only available on MakerWorld and is intended exclusively for private, non-commercial use.

Detailed model of a Demogorgon, printed with JAYO PETG at 200 °C on a Bambu Lab P1S. The print requires support structures, especially in the arm and head areas. Print time varies depending on the chosen size. Ideal as a figure for fans of horror or sci-fi themes.

Notes:

• Supports required: Yes
• Material: PETG (JAYO)
• Printer: Bambu Lab P1S
• Nozzle temperature: 200 °C
• Cooling: Recommended
• Recommended layer height: 0.2 mm for good details

other of my models

Whether as decoration, a collector's item, or part of a diorama scene – this Demogorgon is a real eye-catcher! The AI-assisted design in Blender merely serves as an aid and does not replace my work. The figure was adjusted and edited in Blender. Don't worry, before I upload a model, I check it for inconsistencies and adapt it. If you have any problems, please feel free to contact me. Have fun and good luck with your print!