AjEmEndżajner

cover

IMG_20260318_213631.jpg

IMG_20260318_213637.jpg

IMG_20260318_213646.jpg

IMG_20260318_213725.jpg

IMG_20260318_213729.jpg

IMG_20260318_213733.jpg

IMG_20260318_213737.jpg

IMG_20260323_120228.jpg

IMG_20260323_120235.jpg

IMG_20260323_120239.jpg

IMG_20260323_122800.jpg

IMG_20260323_122803.jpg

IMG_20260323_122845.jpg

IMG_20260323_122848.jpg

IMG_20260323_122852.jpg

IMG_20260323_122856.jpg

plate_1.png

IMG_20251221_151749.jpg

IMG_20251221_151736.jpg

IMG_20251221_151744.jpg

IMG_20251221_151740.jpg

<ul><li>print minimum 160mm</li><li>photo shows 80mm which was printed bad, there is missing hand and there was lot of problems with this print and removal of support</li><li>use support tree</li><li>printed with PLA</li><li>0,2mm ayer </li></ul>

0.2mm layer, 2 walls, 15% infill

New profile

<boostme><boosttitle>Boost Me</boosttitle></boostme><h2>ATHENA greek mythology figure</h2><p><strong>Recommend to print minimum 160mm height </strong></p><ul style="list-style-type: disc"><li>Printed on SLA </li><li>Printed with FDM as 80mm statue (works bad, there is some cracks and errors, also removal support is almost impossible)</li><li>Image and renders made with usage of photoshop </li><li>3D model created with AI usage Tripo 3D</li><li>Fixed and modify to be printable in meshmixer</li><li>Printed and checked, works well</li><li>Be carefull with support is seriously hard to remove i without damage model </li><li>Check scale, recommend to use bigger than smaller</li><li>Filament Jayo PLA dual black-blue</li></ul><p>&nbsp;</p>

Athena greek mythology

ASIA

Print Profile(2)

Description

ATHENA greek mythology figure

Comment & Rating (11)

License

Related Models