Tiny Hold Down M6 Hardware
Print Profile(2)
Description
**There is an issue in MakerLab where the number wont update, the height of the model changes but not the number.
I have seen a few of these style of clamps pop up and thought they might be useful so I made my own and tried them out, they work really well.
I used these furniture style bolts to help solve the bolt length issue that I saw in a few videos and so far so good. I made this version to fix the more common M6 hardware. Below are the amazon links to the ones that I used but most M6 Chicago or Furniture style bolts should work, I found 12 or 16 mm to be the most usefull.
M6 x 20mm Chicago Screws - https://a.co/d/12aJmKc
So you can print them out on their side or on the 45' chamfer on the back of the clamp, I have done some testing and both orientations work well.
Some people were asking about what I used on the track part so here is a link to the track inserts I made for both M5 and M6.
T-Track Insert Nut for M5 and M6 Hardware: https://makerworld.com/en/models/2146982-track-inserts-for-t-track-and-3030-tracks#profileId-2326232
Boost Me (for free)
Consider givng me a Boot if you found this model useful.
Reach out with update ideas or improvments and thanks for your support.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)