Zootopia Nick & Judy (Nick the Fox) Multi-color Multi-part (minimal AMS)

2025/1/19 Update:

Multi-material printers have been very popular recently, so I have also created a multi-color printing version of Judy. Multi-color printing allows for further size reduction. This version of Judy is only 14cm tall, palm-sized and very cute. I particularly like the adorable feel of these small figurines. This size is not achievable with disassembled single-color prints. I strongly recommend multi-material devices like h2c and u1 to print this version (14cm Judy profile version). A multi-color version of Nick is also in the works, please stay tuned

Printing Notes:

1: Spray lac glue before printing to prevent print failure Most spaghetti issues are due to insufficient build plate adhesion. If you encounter spaghetti, please check your build plate first. Please don't casually give a 1-star rating

2: The eyes are multi-color Print in Place. If you don't have AMS but really want to print, you can try separating the eyes into individual objects for printing. I have not tested this yet, please test the feasibility yourself.

3: The left hand can be directly pushed firmly into the holes in the sleeve and clothing; it's stable even without glue.

PS: When printing the pants, the gray filament ran out halfway through printing. I only realized I switched to the wrong color after changing it, so the pants on the cover image have a color difference. Please ignore it, haha, your prints won't look like this