Mario Lucky Cube Coin Bank

The design's dimensions are perfectly suited to accommodate a 100 yuan bill. If some find it too large, feel free to scale it down proportionally. However, since I've designed the magnet hole to be 6mm x 2mm, I recommend reducing the print size by half, resulting in a 3mm x 1mm magnet hole. Regarding the question mark section, the tolerances vary depending on the filament used. Some materials might not be able to fully dry for a snug fit. You can use glue to secure them together.

The ratio of the design is just enough to put in 100 yuan bills, if some friends think the whole is too big, can be scaled down, but because I reserved the magnet hole is 6mm x 2mm, then I suggest to reduce the print by half, so that the magnet hole will become 3mm x 1mm. in the question mark part, different consumables error is different, some consumables may not be able to dry and inserted well, you can use the glue to glue them together. together.

Translated with DeepL.com (free version)