Engine Hood Support Cap and Base Clip

This model is for when your beloved car's engine compartment hood support cap is lost. Through my actual testing and verification, it can save you valuable time and avoid wasting filament and time resources from multiple validations. Here are the instructions: First, the pause layer is for embedding nuts. Second, if you only need the support cap, please delete the other models and keep only what you need. Remember to also delete the pause layer if you don't need it. Third, generally, please use PETG for printing. Fourth, for the base and clip, please confirm if your car's engine compartment has holes larger than 3mm. If it's exactly 3mm, you don't even need to print the base, hahahahaha. Fifth, if you need the base and clip, please prepare a 3mm machine screw, about 10mm long (a bit longer is fine). If you really don't have one, I've uploaded the original file, and you can modify it yourself (I don't recommend it, as I'm not clear on my own modeling process tree, hahahahaha). One last thing: please open it with software SW2018 or later.