Paper Airplane Launcher

Model Introduction:
A "gun" capable of launching paper planes, it uses the elasticity of rubber bands to launch paper planes Therefore, you need to prepare two additional rubber bands If you want greater elasticity (to make the plane fly farther), you can also prepare more rubber bands, just make sure the number of rubber bands on both sides of the model is equal
This model has a special design for the rubber band attachment points, making it difficult for the rubber bands to fall off once attached, eliminating the hassle of reattaching them after each launch
This model weighs only 50g, welcome to print and play
Please install according to the picture sequence after printing
Figure 1: Insert the 'launcher plate' into the 'barrel' from the rear of the 'barrel'
Figures 2, 3: Use the 'bolt' and 'nut' to firmly connect the 'handle', 'trigger hook', and 'barrel' The 'trigger hook' is placed inside the 'barrel' After installation, the 'trigger hook' can rotate around the 'bolt'
Figure 4: Connect the front of the 'barrel' to the 'launcher plate' with rubber bands, ensuring the same number of rubber bands on both sides
Figure 5: Pull the 'launcher plate' backward and use the 'trigger hook' to secure the 'launcher plate' at the rear of the 'barrel' At this point, the rubber bands are stretched to accumulate power
Finally, press the rear of the 'trigger hook' with your thumb to release the 'launcher plate' The 'launcher plate' will rapidly slide forward within the 'barrel', pushing the paper plane placed inside the 'barrel' and thus launching the paper plane

Model Advantages:
1. no supports, eliminating the hassle of removing supports
2. Rubber bands are not easy to fall off after being attached to the model
3. Features a split design, making accessories easy to replace; if individual parts are damaged, simply re-print them
Tips:
Paper plane folding tutorial: https://b23.tv/kVdBZ7W
The paper plane I folded following this tutorial can fly very far You can also fold paper planes from memory; the paper used should not exceed the size of an A4 sheet
Welcome:
Welcome to visit my homepage, there are many fun and useful things (●'◡'●)
Homepage link: https://makerworld.com.cn/@Pbreak