Basic Flame Symbol

Basic Flame Symbol. A simple flame silhouette for décor. Stick it to a wall, door, or any smooth surface with double‑sided tape. It can also stand on its own as a small desk accent, but free‑standing stability is limited. 

Best use

• Outdoor or indoor wall décor
• Doors, signage, themed setups
• Labels and simple room accents

Material

• PETG chosen for outdoor use. It handles humidity and sunlight better than PLA. If you want long‑term UV resistance, consider ASA for a future version or add a clear UV‑resistant spray.

Printing

• No supports needed
• Orientation: lay flat for best surface finish
• PLA, PETG, or ASA all work.
• Brim optional

Suggested settings

• Height: 180 mm
• Thickness: 15 mm
• Layer height: 0.2 mm
• Walls: 3
• Infill: 15 to 20 percent. Go higher if you want better free‑standing stability
• Top and bottom: 4 layers
• Nozzle: 0.4 mm

Scaling

• You can scale in Bambu Studio. Uniform scaling keeps proportions
• If you scale up, thickness also increases and stability improves
• If you scale down, thickness decreases and it may tip more easily

Mounting tips for outdoor

• Clean the wall with isopropyl alcohol and let it dry
• Use thin double‑sided acrylic tape or outdoor foam mounting tape. Press firmly for about 30 seconds
• Avoid rough, dusty, or very textured paint. Adhesion will be weaker
• If the wall gets strong sun and rain, consider using multiple tape strips or a small hidden adhesive bead at the base

Notes

• Keep away from heat sources and open flames
• Edges can feel sharp if printed very thin
• Free‑standing stability is limited. A small base or Blu‑Tack helps if you want it on a desk