Mini Wedges – small wedges / spacers

• Aligning & Stabilizing components
• Spacers (Shims) for assembly and bonding
• Securing during screwing / gluing
• Small helpers for crafting & 3D printing

🖨️ Print Recommendation

• Material: PLA
• Layer Height: 0.20 mm (or 0.16 mm for finer surfaces)
• Walls (perimeter): 3+ (I used 2 since they did not need to be too stable)
• Infill: 15–30 %
• Support: ❌ not necessary
• Brim: optional (for warping)

⚙️ Customizable as needed

✅ You can adjust walls (perimeter) and infill depending on the application:

• More walls/infill = more stable & robust
• Fewer walls/infill = faster & lighter print

💡 Pro-Tip: For more stability, more walls often achieve more than just more infill

ℹ️ Note

Intended for light to medium applications (PLA is hard but brittle)
For high loads or continuous use: PETG or ABS