SCX6 Honcho Flat Bed With Multiple Options

This started out as a remix of the scx6 honcho flatbed my Gillex88 on thingiverse; where I changed all holes to countersunk as well as reinforced any holes where a screw was being threaded into a printed component.

Additionally, I created options so that you can mix-and-match bed components depending on much you want to modify the roll cage, so you can choose to cut the sides off of the cage and/or the stinger off the back of the cage. Options are also included so that you can remove the tool box and have a huge totally flat bed area. 

For the options without the stinger, the bed center files include bushings/slugs to fill in the two counterbored holes in the back of the cage. If you don't use these, it is very easy to crack the back lip on the print when installing the countersunk screws. This option also has mounting locations for two lights under the bed (use m1.4 screws).

Please note I have not been able to test the bed side panels where the cage sides are not removed. The countersunk screws take up a little more space than the flat screws from the original design, so a bit of material may need to be removed from the cage to get everything to fit.