Rotating Vacuum Hose Clamp with Ball Bearings
Print Profile(1)
Bill of Materials
- 608-ZZ x 1: Sök på Amazon
Description
I have a vacuum cleaner, but I was missing a hose holder that could actually move with the hose.
Everything I found was static.
So I decided to create something simple.
Compact.
And fast to print.
The clamp rotates using a ball bearing, which means the hose follows naturally without twisting or fighting back. Clean and smooth.
You’ll need either a 608 bearing (608 / 608ZZ)
—or you can print one yourself.
I’ve tested a printed bearing and it works great.
👉 Printed bearing by @Tassesin
https://makerworld.com/sv/models/473167-608z-6000z-6001z-roller-bearing-v2#profileId-383170
Assembly
- Print both parts
- Press in the bearing (608 or printed)
- Screw the holder in place
- Push in the clamp and enjoy
Print settings
- Material: PLA
- Walls: 4 wall loops (for strength)
- Infill: 15%
- Supports: small support part (leave it enabled, print laying down)
- Print as oriented in the profile
Boost Me (for free)
If you find this useful, please give it a like and feel free to boost — it really helps 🙌
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)