EIBOS DYAS AMS Bezel / Cover

This trim panel is a custom-fit add-on for the Eibos Dyas modification on the Bambu Lab AMS 1 and ensures a cleaner look for your setup. It slides under the AMS and conceals the noticeable, raised feet of the Eibos adapter, making the overall system appear much more harmonious

AMS 1 Compatibility

• Developed specifically for the original Bambu Lab AMS in combination with the Eibos Dyas filament dryer
• Two variants are considered: AMS 1 with narrow side chambers - older version and AMS 1 with wide chambers - new AMS 1 version (it's clearer in the pictures)
• A dedicated print profile is included for both AMS versions, so you can start immediately

Printing and Assembly

• For assembly, a drop of silicone spray on the plug connections and a small hammer are recommended to carefully and completely join the elements
• The connections are intentionally designed to be tight so that the panels do not come loose during operation
• The fully assembled panel is simply pushed into the AMS from below and positively locks into place

Design Goal and Use

• The design aims for a tidy, enclosed look without visible, raised Eibos feet under the AMS
• Ideal for setups on open tables or shelves where aesthetics and cable/hardware management are important

• Thanks to the concealed feet, your AMS-Dyas modification integrates much better with the rest of your printer setup

   

• This mod is for anyone who wants to visually complete their Dyas modification without altering the actual AMS structure