Domino Slide

Why always stairs?
I once asked myself that and remembered my childhood, where I had a domino slide. That's why I designed this slide, which is compatible with the domino stairs. This slide can therefore be used as a start or integrated into a line, so that a downward staircase can be replaced by the slide.

MORE MODELS

I have created more models for domino fun. Feel free to check them out, maybe there's something else you could use.

DOMINO LINE SAFETY BARRIER

Domino Line Safety Barrier – Free 3D print model – MakerWorld

This allows you to build in individual safeguards when building larger and longer projects and minimize the risk.

DOMINO STAIRS

Domino Stairs – Free 3D print model – MakerWorld
With these stairs, you can bridge other lines and build cool angles. It also helps to make the most of the space in your apartment. The domino stairs have plates of different widths that can be placed on top, so that one or two lines can be bridged.

DOMINO STAIRS WITH ANCHOR

Domino Stairs with Anchor – Free 3D print model – MakerWorld

If the regular stairs are too awkward for you because the top plates sit loosely, I have designed stairs with an anchor. The top plate is hooked onto the stair treads and sits firmly. Nothing can slip, and you can even align the stairs more easily for building. Here, too, there are top plates of different lengths.

DOMINO CROSSING

Domino Crossing – Free 3D print model – MakerWorld

If you find the bridges too large, for example, because you want to cross lines in a very small space, there is another option: the crossing. The part is placed exactly in the middle of both lines, and the pins push the line on the other side without using a bridge or accidentally bumping the other line.

DOMINO “DC” DIRECTION CHANGER

Domino "DC" Direction Changer – Free 3D print model – MakerWorld

This direction changer allows you to change the direction of the line in a small space. This eliminates the need to build curves, which consume dominoes and are also a potential source of error, as the line can stop if the curve is not built correctly. This DC is an ideal replacement.

MINI-DOMINO “DC” DIRECTION CHANGER

Mini-Domino "DC" Direction Changer – Free 3D print model – MakerWorld

This DC is even smaller, allowing the lines to be closer together. This way, tight curves that are very likely not to fall can be replaced.

MINI-DOMINO CROSSING

Mini-Domino Crossing with Integrated Pins – Free 3D print model – MakerWorld

This Mini-Domino Crossing is much smaller, so it disappears better between the lines.

The pins are also directly integrated, so they cannot fall out. This way, you can cross two lines in an even smaller space without bridges.

I would be very happy if you check out the other parts, perhaps print some, and give me feedback so I can improve them.

Further new parts or improvements will follow from time to time, so feel free to follow me so you don't miss anything.