AMS2Pro side-mounted filament spool - Free 3D Print Model

Search models, users, collections, and posts

user_3872541360

3D Printer>3D Printer Accessories

IP Report

Print Profile(4)

All

P2S

P1S

H2S

H2D Pro

X2D

X1 Carbon

H2C

X1E

A1 mini

P1P

H2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

5.9 h

1 plate

4.8(21)

This is a test piece to check if your ams2pro bottom fits the model

Designer

32 min

1 plate

5.0(4)

Modified for AMS2 with 43mm spaced ribs

6.1 h

1 plate

Alternative 43mm spacing test piece

36 min

1 plate

Open in Bambu Studio

Boost

103

422

163

129

Released

Description

Content has been automatically translated.

Show original

This filament spool requires two 608zz bearings. Insert the printed part into the slots on either side of the AMS, either side works

Using 95a TPU has no impact

Filament spools with a thickness of 7cm or less can be used, and the filament feeds very smoothly

2026.1.12 Update: Added a reinforcement rib, hope it's useful. Also added an opening so it can symmetrically snap into AMS2 on both sides

2026.4.23 Update: According to feedback from the comments section, some users' AMS2 units are not compatible with my model, possibly due to different production batches. Therefore, a gap test piece has been added. Please print the test piece before printing the entire model (requires 15 grams of filament and 30 minutes) to avoid wasting filament and time

If you have any suggestions or comments about the model, please leave a message in the comments section

Spool Holder P2S

AMS2