Cross with the face of Jesus Christ
Print Profile(1)
Description
Boost Me (for free)
If you want to support me for my work I would be grateful. Thank you!
I propose this magnificent Cross with the face of Christ the redeemer with thorns
I used a wood filament. Excellent for gifting or for use as wall decoration, office furniture, home, church, or places of worship
The model can be enlarged or reduced as desired by the slicer. Colors can be varied from the slicer
The precautions I ALWAYS adopt for good prints are the following: dry the filaments and clean the print bed with hot water and dish soap, then dry it with compressed air avoiding touching it with your hands
If you wish you can add a hole by right-clicking on the object and then on “Add negative part” choosing the cylinder and positioning it at the top. If you have difficulties let me know and I will add a print profile with a hole and another with a hook
Happy printing everyone!
PRINTING INSTRUCTIONS:
Layer height 0.2 mm
Initial layer height 0.2 mm
Wall loops 2
Top shell layers 5
Bottom shell layers 3
Infill 15%
Grid pattern
Supports Yes
Outer wall speed 200 mm/s
Inner wall speed 300 mm/s
Normal print acceleration speed 8000 mm/s
Outer wall acceleration speed 8000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (34)