Zenless Zone Zero Ye ShunGuang January Wallpaper
Print Profile(3)
Description
Horizontal
Project: YeShunGuang.hfp
Layer height of 0.08mm with 100% infill, first layer height of 0.14mm
Model dimensions are 200x112.5mm
You can print at higher layer heights below the base thickness of 0.14mm
Maximum allowed thickness 3.18mm and actual thickness 3.18mm
#000000 IMAGE Conversion #000000 Translucency value TD: 0.6
#8e9089 PLA BambuLab Basic Gray Translucency value TD: 2
#ffffff PLA BambuLab Basic Jade White Translucency value TD: 5
#c00d1e PLA BambuLab Basic Red Translucency value TD: 4
This print uses 4 types of filament
!!!! It seems you have mixed filament types. Make sure this is what you want. !!!!!!
!!!! It seems you have set "Image Color" to "Filament". This cannot be printed. !!!!!!
Filament change instructions:
Start Conversion #000000
Change to BambuLab Basic Gray at layer #11 (0.94mm)
Change to BambuLab Basic Jade White at layer #22 (1.82mm)
Change to BambuLab Basic Red at layer #34 (2.78mm) until the end.
Vertical
Project: YeShunGuang2.hfp
Layer height of 0.08mm with 100% infill, first layer height of 0.14mm
Model dimensions are 92.27x200mm
You can print at higher layer heights below the base thickness of 0.14mm
Maximum allowed thickness 3.18mm and actual thickness 3.18mm
#000000 IMAGE Conversion #000000 Translucency value TD: 0.6
#8e9089 PLA BambuLab Basic Gray Translucency value TD: 2
#ffffff PLA BambuLab Basic Jade White Translucency value TD: 5
#c00d1e PLA BambuLab Basic Red Translucency value TD: 4
This print uses 4 types of filament
!!!! It seems you have mixed filament types. Make sure this is what you want. !!!!!!
!!!! It seems you have set "Image Color" to "Filament". This cannot be printed. !!!!!!
Filament change instructions:
Start Conversion #000000
Change to BambuLab Basic Gray at layer #11 (0.94mm)
Change to BambuLab Basic Jade White at layer #21 (1.74mm)
Change to BambuLab Basic Red at layer #34 (2.78mm) until the end.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)