Messi Argentina - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 101x170mm in size

PLA Black

PLA Gray

PLA Sky Blue

PLA White

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Blue Gray

At layer #16 (1.36mm) swap to Sky Blue

At layer #21 (1.76mm) swap to White for the rest.

If you want to see my other Football-themed HueForge projects

For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually.

If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result.

⚽ If you're interested, you can also find a collection of jerseys from the greatest players of various teams here

☕ Support my projects. A small gesture to help me create and test new models every day.