Lenovo M90n/M75n Mount
Print Profile(1)
Description
Lenovo M90n/M75n Mount
- 2 Piece design
- Cut outs for WiFi antenna
- Screw holes are sized for #8 machine screws
Can be used to wall, under desk, or whatever you heart desires for you Lenovo M90n
Recommended Print Settings:
- 0.2mm layer height using the High Quality preset
- 5 wall loops
- 35% gyroid infill
- Supports are required
- I used auto tree supports in Bambu Studio. I also used Support for PLA for the interface material. Print profile has the settings I used. Supports can be a bit of a pain to remove.
- I used PLA Matte but PETG or your favorite filament will work.
If you use the “One File” STL make sure to split the model into objects in your slicer.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)