RadClean – Radiator Vacuum Brush (32 / 35mm)

RadClean – Because dust loves radiators.

RadClean is a vacuum brush designed specifically for cleaning radiators, where dust hides, builds up, and waits patiently to be ignored.

Clip it on.
Slide it between the fins.
Turn the vacuum on.

And suddenly years of forgotten dust disappear into the void.

Designed to work with standard vacuum cleaner tubes, RadClean reaches deep between radiator fins without scratching or bending them.

Now available in two versions, made to fit the most common vacuum tube sizes.

Versions:

• Ø32 mm – compatible with 32 mm vacuum tubes
• Ø35 mm – compatible with 35 mm vacuum tubes

Same brush. Same cleaning power. Just the right fit.

Nozzle widths:

• 8 mm
• 6 mm

Features:

• Designed for radiator cleaning
• Compatible with standard vacuum cleaners
• Two size variants included (32 mm & 35 mm)
• Slim profile for reaching between radiator fins
• Safe for metal and painted surfaces
• Lightweight and easy to use

Perfect for:

• Radiators and heaters
• Hard-to-reach dusty spaces
• Seasonal deep cleaning
• Homes where dust always wins (until now)

Warning:
Using RadClean may reveal shocking amounts of dust, raise questions about the last cleaning, and significantly improve heating efficiency.

RadClean – Out of sight doesn’t mean out of reach.

☕ If you like this model, you can support me here:

🛠️Before You Start Printing

Before printing, give the bed a quick clean 🧽 — good adhesion = better first layer and accurate geometry.

Use dry filament (wet filament loves to pop, string, and ruin dimensions).

When using my MakerWorld profiles, make sure the selected material matches what you’re actually printing. Different materials shrink and behave differently — the wrong profile can mean wrong dimensions.

Also, my STL files are designed and dimensioned for PLA. If you print them in PETG, you may need to slightly rescale the model to compensate for different shrinkage.

Clean bed. Dry filament. Correct material. Done 😄