Crimson Tear Flask Lamp (LEDKit 001) - Elden Ring

Note: This is a long print with many filament changes. Before printing, make sure your build plate is thoroughly cleaned with dish soap (not hand soap, as it can contain oils), and that your filament is properly dried.
 

Bring a piece of The Lands Between to your desk: this lamp is inspired by the Flask of Crimson Tears from Elden Ring—the sacred flask filled with crimson tears that restores your HP in-game. As an alternative, you can also print the model as a Cerulean Tear Flask (blue)—in-game, that version restores FP.

Hardware: Designed for the Bambu Lab LED Lamp Kit 001 (MH001). 

Colors / Filaments

• Glass (red): Bambu Lab PLA Translucent Red → for the Cerulean variant: PLA Translucent Blue
• Base + “tree-root-like” wraps: PLA Silk Gold

The translucent part is intentionally exactly 3 wall layers thick so the light is diffused and evenly spread. I haven’t tested it with non-translucent PLA—depending on the material, some light might still pass through, but translucent PLA is strongly recommended.

Printer Recommendation

• A H2D or H2C is ideal because the model is large and the look involves many filament changes.
• Printing on other printers is possible, but depending on your setup it can take significantly longer and may create a lot of waste with multicolor/filament swaps.
• For makers who enjoy tinkering and painting, a single-color print profile is also included, which prints only in translucent PLA.

Assembly Instructions

1. Insert the LED Lamp Kit 001 into the provided socket.
2. Insert the socket from the bottom into the lamp and twist until it clicks into place (it should sit loosely, but not fall out).
3. Route the cable neatly and do a quick function test (5V USB).
4. Restore your HP and FP