Cragon
Print Profile(1)
Description
I made this model going for a creature that is 75% dragon and 25% cat. I made this model using makerlab's image to 3d software. With this model there are a few things I recommend for best results. I highly recommend using some sort of spray or glue to enhance bed adhesion where the cat is getting printed and the purge tower. Another thing I highly recommend is using needle nose pliers and a flat head screw driver to carefully take some of the supports off. It may take some time to take the supports off but it is definitely worth it. I hope this model brings you joy, leave a like and boost for more models in the future!
Boost Me (for free)
I would be very grateful if you left me a boost, it would help me out a lot along my 3d printing journey!🚀😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (50)