Homedesign3D

cover

IMG_3828_(1).jpg

IMG_3827.jpg

plate_1.png

2026-01-09_b102c45c71ad48.jpg

IMG_3700.JPG

IMG_3699.jpg

IMG_3701.JPG

0.2mm layer, 2 walls, 15% infill

PolyReelStudio

IMG_6145.jpg

IMG_6147.jpg

Reduced Print Time - Contour-Optimized Setup&nbsp;Print Profile DescriptionThis print profile was tuned specifically for the ribbed contour geometry of this model with a focus on improving slicer path behavior, reducing unnecessary internal fill generation, and maintaining a clean surface finish.Wall generation and line width behavior were adjusted to better follow the narrow ribbed contours throughout the body of the holder. These geometry-aware adjustments reduce unnecessary internal fill behavior between the exterior grooves, resulting in an approximate 1.9 hour reduction in print time while preserving the intended appearance and structure of the original design.Most of the model prints at 0.22 mm layer height, while the upper curved transition areas are reduced to 0.20 mm to help minimize visible stepping as the surface curves inward.Top surface settings and line widths were also refined to improve finish quality without relying on ironing. Print speeds remain relatively conservative overall, with only minor adjustments applied in select curved regions where the reduced layer height benefits from smoother transitions.All changes are limited to print settings only. Original model geometry has not been modified.Designed for PLA and PETG.Print Settings Summary<ul><li>Geometry-aware contour tuning</li><li>Adjusted wall generation behavior</li><li>Refined line widths for ribbed geometry</li><li>Reduced unnecessary internal fill behavior</li><li>Approx. 1.9 hour print time reduction</li><li>0.22 mm base layer height</li><li>0.20 mm upper curved transition layers</li><li>Refined top surface pattern and line widths</li><li>Conservative speed tuning focused on consistency</li><li>No ironing required for clean top finish</li></ul>Notes<ul><li>Tuned specifically for this model geometry</li><li>Focused on contour consistency and print efficiency</li><li>Intended as an alternative slicer workflow for ribbed surfaces</li><li>Credit to the original designer for the model itself</li></ul>&nbsp;

Reduced Print Time - Contour-Optimized Setup

Modern organizer for your bathroom to save up space :) Fits standard size cotton pads and Q-tips. &nbsp;Ironing setting can be removed to save on print time, but is highly recommended for a clean finish. Printed with DeepLee matte PLA in beige. &nbsp;Any feedback and requests are very welcome :)

Modern cotton pad + Q-tip holder

ASIA

Print Profile(2)

Description

Comment & Rating (82)

License

Related Models