XXL Modular, Expandable Drawers
Print Profile(2)
Bill of Materials
- M3x10 Schrauben x 2:
Description
Boost Me (for free)
Your appreciation of my work costs you nothing and motivates creators like me to conjure up more cool models for you.
This modular and expandable drawer system was developed so that my wife has storage space for her things in her hobby room.
These are extra large for plenty of storage space and can only be printed on the H2 series. A4 size fits perfectly.
I couldn't test if it fits on the H2C.
The design aims for the highest possible stability with the lowest possible amount of material. Nevertheless, due to its size, quite a bit is needed.
For stability, I recommend using PLA+! PETG is too flexible. PLA is also an option if necessary.
Tall and small dividers for the compartments have been added, which can be easily inserted at 5cm intervals.
The marked connectors are intended as feet, with the angled side facing down. The unmarked ones are intended as top and side finishes.
Please print them only upright (preferably using my profile). If printed lying down, they may not fit well due to material expansion.
The handles are for screwing on. You will need M3x10 screws for this. Heat-set inserts are not needed.
I used these for it:
I will add a top plate in the coming days, as you can't really place anything on the casing without it bending slightly and making the drawers harder to open.
There is an H2S and an H2D profile.
If you like this model, please leave me a Boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)