snapmaker u1 riser cabinet

Updated on March 17, 2026:
Released derivative partprinting plate storage accessory

Updated on February 19, 2026:

    Added Snapmaker format 110mm height print profile

Updated on February 8, 2026:

    Added case stacking connector, if a higher size is needed, cases can be stacked, requires replacing drawer slides in the original file

Updated on January 30, 2026:

     Corrected model dimensions, if you printed parts previously, we apologize, you will need to print again For Snapmaker U1, because using PLA as a support interface resulted in overall layer shifting, the front frame was printed with a slightly different configuration from the print profile, please directly download the print profile from the STL/CAD files

Snapmaker U1 riser drawer, it raises my U1 to a more suitable height for operation while providing two large drawers for various accessories, and this drawer is designed to be stackable for flexible space expansion A Polydryer adapter will be added later for keeping filament dry and providing additional printing plate storage When using a multi-nozzle printer, it is recommended to use PLA as the support interface, the Snapmaker Orca profile has been uploaded Please note that this model is still in an early stage, and some part dimensions may change later

Installation method is as follows:

1. Insert three longitudinal dividers

2. Secure with screws:

3. Install corner pieces and back panel

Install middle divider

Install front panel

Install limit blocks

Install auxiliary support