Search models, users, collections, and posts
Stackable Dispenser Container / Funnel / Lid
IP Report
Print Profile(5)
0.2mm layer, 2 walls, 15% infill
Designer
19.8 h
3 plates
0.2mm layer, 2 walls, 15% infill
Designer
2.7 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
9.3 h
1 plate
0.12mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
Click to see more
Open in Bambu Studio
Boost
9
21
5
0
26
11
Released
Description
Content has been automatically translated.
Stackable containers with funnel and lid
Funnel and lid both have threads so they can be screwed onto the containers
making portioning easier, perfect for filling bottles
Height: 95
Diameter: 80
Inner diameter: 65
The print profiles are all created with PETG as it is food-safe
if you print it with PLA, you must ensure that the color does not bleed
No supports are needed; if you want to reduce print time, you should set the infill lower
Initially, the screw connection is very stiff, so you must clean the threads or gently screw them on and off again!
Thread by thread
Do not turn all the way at once!
Otherwise, the funnel's lid will break
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (5)