Print Profile(1)
Bill of Materials
- uxcell Round Steel Rod, 3.5mm x 2: cut to 18mm
- 1oz, Adhesive Stick on Wheel Weights x 1:
Description
This is custom stand made for "Kotobukiya ARTIST SUPPORT ITEM 1/1 Scale Hand Model" The hand itself is on a ball joint allowing 360 rotation along with been attached to a rotating peg allowing for more motion. I made it so i could draw the hand from any angle.
It does require parts
7 1oz Car/Tire Weights
3.5mm Metal Rods
The weights are to balance the stand from falling due to the hands weight
the metal rods are added to plug into the hand, metal because PLA can't handle the weight
You will need the pause the print on layer 48 to add weights.
The rods will need to be cut roughly 18mm and glued in to the ball jointed peg
Tools
Some Form of glue ( I used two part expoy, JB Weld)
Something to cut the rods (I used a dremel)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)