A1 External Dual Spool Holder
Print Profile(3)
Bill of Materials
Description
This model is necessary for those who do not have enough space to install an additional coil. Well, I had to do it when buying a second A1 printer. It came incomplete. Accessories and a stand were missing.
For assembly, you also need two M4x40 screws for a 3mm hex key and self-locking nuts. A piece of wire with a diameter of 2.5mm and a length of 40 mm.
We print all the details with a 0.2mm layer, the contour is triple, the filling is 30% giroyd. The PTFE mount should preferably be printed with a layer thickness of 0.16mm.
Эта модель нужна тем у кого не хватает места для установки дополнительной катушки. Ну а мне пришлось её делать при покупке второго принтера А1. Он пришел некомплектный. Отсутствовали аксессуары и подставка.
Для сборки так-же нужно два винта М4х40 под шестигранный ключ 3мм и самоконтрящиеся гайки. Кусок проволоки диаметром 2.5мм и длиной 40мм.
Все детали печатаем слоем 0.2мм, контур тройной, заполнение 30% гиройд. Крепление PTFE желательно напечатать с поддержкой толщина слоя 0.16мм
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (37)