Drawer and Box Storage Dividers - Parametrically Customizable

My drawers are quite deep, and I often need to adjust the space.

The Gridfinity system is great, but I feel it uses too much material and doesn't seem to allow for creating some of the narrow slot-shaped spaces I want.

So I'm replacing it with a simple wall + divider solution.

All dimensions are customizable to fit your drawers or boxes.

Dimension illustration:

Instructions

• Double walls are not mandatory. If the span is large, you can add it in the middle as a transition.
• If a wall's length exceeds the print area, it can be divided into multiple segments. No additional splicing is required (this is how my drawer is set up).
• The thinnest part of the wall, which is the wall thickness minus the slot depth (thick - slotDepth), should not be less than 2mm.

About divider inserts

• There are no inserts in the customization tool. This is because they are pure cubes. You can add cubes in the slicer software and change their length, width, and height to the required dimensions.
• You can also use cardboard for inserts, saving some filament (though printed parts generally have better quality).
• The thickness of the inserts is "dividerThick" in the customization parameters.

Additionally, if you don't need to divide a large space or don't need frequent adjustments, you can check out this simpler insert solution: