Print Profile(1)
Description
Project: Grim Reaper
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#080a0d PLA Black Transmission Distance: 0.3
#e2dedb PLA White Transmission Distance: 5
#4c5f71 PLA Basic Gray Transmission Distance: 3
#55331a PLA Brown Transmission Distance: 0.8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Brown
At layer #22 (1.84mm) swap to Gray
At layer #24 (2mm) swap to White for the rest.
Boost Me (for free)
Wenn dir das Modell gefällt oder dir geholfen hat, freue ich mich sehr über einen kostenlosen Boost. Vielen Dank! 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)