figurine_Freakazoid_old_crazy

created this model based on the Freakazoid cartoons from the 90

The profile used was 0.2 but if you want extra details yes , go lower , the lines are quite visibile but if you acrylic paint it it might not be needed.

The name tag can be removed, originally it was quite skinny and top of letter “Z” got removed with the support so increased the font with 1milimeter but yeah , in case you don't want it you can remove it.

The painting was done with markers so the layer lines are still visibile , if you use acrylic paint i thing it won't be that visible.

Supports are enabled , maybe increase the Z space depeding on what print profile you want for better support removal.

For Sparse infill pattern i didn't changed it from GRID , it clicked few times but didn't crashed since was not at top layer, so please take care and change it from Grid to something else.

• Layer height : 0.20
• Supports: enabled
• Supports Gap:  (1.5*Layer size)
• Color : Single
• Brim: no
• Tower : no
• Sparse Infill Pattern:  GRID ! 
• Speed: normal
• Filament: Bambulab PLA Basic