Lincoln Memorial
Print Profile(3)
Description
The Lincoln Memorial.
A few printing considerations if you plan to download the raw file.
- Use at least 15% infill. It is a slightly organic model. This means that there are little to no flat surfaces. It will start printing a top surface with a squiggly line across the infill. If there isn't enough infill to hold this up you may experience a failure.
- Use organic tree supports.
- Use a filament that can hide layer lines well. This isnt really gor the layer lines but more so for the top surfaces of the base. You'll see when you slice it that there are actually about 8-9 top surfaces for these areas due to the nature of the organic modeling. I printed with Bambu Marble PLA. Something like PLA-CF or even maybe a Matte White PLA should work fairly well too.
- The 0.16mm High Quality print profile if preferred, but 0.20 should work just fine as well.
- Ensure your filament is dry & calibrated.
- Ensure your build plate is clean and free of finger oils.
This model started off as a 3D scan and was optimized using Nomad Sculpt.
Boost Me (for free)
Membership
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (144)