Chris_Raider

cover

photo_2026-01-13_13-27-55.jpg

photo_2026-01-13_13-27-54.jpg

negro

plate_1.png

cuerpo pintado

plate_2.png

Blanco

plate_3.png

farol

plate_4.png

vela

plate_5.png

vela de pie imprimir despacio

plate_6.png

plate_7.png

2026-01-13_49b33da1c7bf58.jpg

Alturas de capa, relleno y soporte variables dependiendo de la pieza. en el archivo 3mf estan configurados los ajustes optimos del mismo.  altura de capa 0.16 - 0.2relleno 10% giroide.lleva soportes

Variable layer heights, infill, and support depending on the part. The optimal settings are configured in the 3mf file. Layer height 0.16 - 0.210% gyroid infill.Requires supports

0.2mm layer, 2 walls, 5% infill

Captura de pantalla 2026-01-13 133558.jpg

altura de capa 0.2 relleno 5% giroide AMS. 2 dias 6 horas.. Solo Para valientes.

0.2mm layer height5% gyroid infill AMS2 days 6 hours. Only for the brave

Penitente completo AMS 0.2mm 5% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Modelo de Nazareno Penitente Multipartes para pintar o imprimir con AMS lo menos posible.  ACLARACION </h2><blockquote>Las Fotos del Penitente Impreso estan hechos en Multipartes sin AMS escalado al 50% por eso es pequeño.pero para mejor resolución es recomendable imprimirlo mas grande.</blockquote><figure class="image image_resized image-style-side" style="width: 33.62%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002240911/design/2026-01-13_0a949b9246b92.jpg"></figure>los detalles pequeños los he pintado con un marcador pero la impresión es mas que nada para verificar que todo encaje y se pegue bien. &nbsp;&nbsp;<blockquote><h2>IMPORTANTE</h2>LA CAPA DEBE CALENTARSE CON AGUA O CON AIRE CALIENTE PARA QUE SE AMOLDE MEJOR AL CUERPO.. TAMBIEN PUEDE ESCALARSE UN POCO MAS PERO NO ES RECOMENDABLE. LOS BRAZOS VAN PEGADOS A LA PARTE BLANCA.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Si te gusta mi trabajo considera apoyarme dandome un Boost. </boostcontent></boostme></blockquote>

<h2>Multipart Penitent Nazarene Model for painting or printing with AMS as little as possible. CLARIFICATION </h2><blockquote>The photos of the Printed Penitent are made in Multipart without AMS scaled to 50%, which is why it is small. But for better resolution, it is recommended to print it larger.</blockquote><figure class="image image_resized image-style-side" style="width: 33.62%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002240911/design/2026-01-13_0a949b9246b92.jpg"></figure>I painted the small details with a marker but the print is mainly to verify that everything fits and adheres well. &nbsp;&nbsp;<blockquote><h2>IMPORTANT</h2>THE CAPE MUST BE HEATED WITH WATER OR HOT AIR SO THAT IT CONFORMS BETTER TO THE BODY. IT CAN ALSO BE SCALED UP A BIT MORE, BUT IT IS NOT RECOMMENDED. THE ARMS ARE GLUED TO THE WHITE PART.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my work, consider supporting me by giving me a Boost. </boostcontent></boostme></blockquote>

Print Profile(2)

Description

Multipart Penitent Nazarene Model for painting or printing with AMS as little as possible.

CLARIFICATION

IMPORTANT

Comment & Rating (20)

License

Related Models