Universal Crib Mount for Owlet Camera Dream Gen 3

This file is a universal mount for the baby monitor camera that comes with the Owlet Dream Duo Gen 3 kit (Dream Sight Camera). No glue or extra parts needed - 100% 3D printed on 1 plate!

It utilizes the screw slots in the provided base to hold the camera at a 45-degree angle, allowing free adjustment of the viewing window down into a crib or bassinet or throughout the room. It attaches to any surface up to 1.25" thick.

I've included print files for 3 different screw lengths so that you can use whichever grabs your crib without much overhang left on the back side. For all of the screws, the fit will be a bit “tight” on the first screw. Simply screw the screw all the way once and then back out and the new fit will be perfect. 

I included 2 plates, one for vertical mount and another for horizontal mount. The vertical mount is intended for mounting to the walls of a crib and the horizontal mount is intended for mounting to a wall shelf. You only need to print one unless you want options for travel.

DISCLAIMER: I recommend removing this from the crib or bassinet once your child can pull to stand or otherwise reach it. Any 3D printed part could break into small pieces and become a choking hazard. Keep this out of reach to be safe.