Model 1—Convert Ever Peak Industrial Presser Foot [EP Presser Foot] for Household Sewing Machines

Convert Ever Peak [EP] Industrial Presser Foot for Household Sewing Machines

Ever Peak—"EP" is a brand of presser feet for industrial sewing machines; EP brand industrial presser feet need to be purchased separately.

[20260719 Additional Notes]

This modification is applicable to the following EP industrial presser foot models:

1. P36RN and other 5mm left single-sided presser foot series

2. P35LN, P36LNC(RS), and other 5mm right single-sided presser foot series.

3. P370, P368 toothpick presser feet of the same specification.

4. SPT-S58NK and other Teflon presser foot series.

For details, please refer to the model images and plate markings.

[20260629 Update Log]

Improved support surfaces and print parameters.
 

Added Teflon presser foot modification, and newly tested the versatility of right single-sided presser foot short clips and toothpick presser feet with the modified parts.
 

The presser foot modification requires the use of binding screws. It is recommended to purchase "6mm, 7mm, 8mm" sizes of M2 model flat-head binding screws. Due to differences in shrinkage rates and performance of various filament brands, please select the binding screw size from the above that best fits the presser foot modification part for installation.

————————————————————————

It is recommended to print with PTEG filament or stronger filament

Modification Steps:

Use a screwdriver of appropriate size, a metal rod like a nail, and a hammer to punch out the retaining pin of the original industrial presser foot.
Install the presser foot and original spring onto the printed presser foot base, and secure them with flat-head binding screws (if printing accuracy is not high enough, you might need to slightly sand the screw holes to insert the screws).

You can also prepare other rivets with a diameter of no more than 2mm and a rod length of 6mm/7mm/8mm for fastening.