MadeOnce

cover

Screenshot 2026-01-14 at 22.11.25.png

Vase 2.png

6eaab425-7c67-4123-8f42-cee97dcbc778-2.png

IMG_1083.jpeg

IMG_1084.jpeg

plate_1.png

2026-01-14_ee1990a3277498.png

<h2>Recommended Print Profile – Twisted Globe Vase</h2>Print Mode Vase mode (Spiralise outer contour)Nozzle 0.6 mm (recommended) 0.8 mm also works well for a bolder, heavier lookLayer Height 0.28–0.32 mm (Use the higher end for smoother spirals and faster prints)Line Width 120–140% of nozzle diameter (e.g. 0.72–0.84 mm on a 0.6 nozzle)Wall Count 1 (vase mode)Infill 0%Top / Bottom Layers Bottom: 3–4 solid layers Top: nonePrint Speed Outer wall: 25–35 mm/s Slow printing significantly improves surface finish on the ribsTemperature PLA: 200–215 °C Silk PLA: 210–220 °C Stone / matte PLA: follow filament spec, usually +5 °CCooling Part cooling fan: 100% after first few layers Aux fan: optional, low or off (depends on printer)Supports NoneAdhesion Brim optional (5–8 mm) if your printer struggles with tall prints Otherwise prints fine directly on textured PEIEstimated Print Time Varies by height, but typically 3–6 hours at recommended speeds<h2>Filament Recommendations</h2><ul><li>Matte PLA for a ceramic-like finish</li><li>Silk PLA to emphasise the spiral highlights</li><li>Stone / marble PLA for a sculptural, gallery-style look</li></ul><h2>Notes for Best Results</h2><ul><li>Slower = better on this model</li><li>Avoid aggressive acceleration or vibration</li><li>The ribbing is intentional — visible layer lines are part of the design</li></ul>

0.8mm nozzle, 0.2mm layer, 1 walls, 0% infill

<h3>Twisted Globe Vase – Sculptural Spiral Design</h3>Commercial LIcence included for all who boost!&nbsp;This vase features a rounded, globe-like body wrapped in a continuous spiral rib pattern that flows naturally into a slender neck. The design plays with light and shadow, giving the surface a sense of movement while keeping the overall form calm and balanced.Designed specifically for vase mode printing, the ribbing is intentional and works beautifully with visible layer lines, especially when printed in matte, silk, or satin filaments. The wide base provides good stability, while the narrow neck makes it ideal for dried flowers, single stems, or as a standalone decorative object.This model prints cleanly and reliably, making it suitable for both display pieces and everyday decorative use.Print notes:<ul><li>Designed for vase mode / spiralise outer contour</li><li>Recommended nozzle: 0.6–0.8 mm</li><li>Slow print speeds give the best surface finish</li><li>Matte PLA, silk PLA, or stone-style filaments work especially well</li><li>No supports required</li></ul>

Twisted Globe Vase – Sculptural Spiral Design

ASIA

Print Profile(1)

Description

Twisted Globe Vase – Sculptural Spiral Design

Comment & Rating (0)

License

Related Models