MadeOnce

cover

bathroom vase.png

Diamond vase.png

IMG_0995.jpeg

IMG_0996.jpeg

plate_1.png

2026-01-14_b0909aaeff3538.png

<h3>Print Mode</h3><ul><li><strong>Vase mode / Spiralise outer contour</strong></li></ul><h3>Nozzle</h3><ul><li><strong>0.6 mm (recommended)</strong></li><li>0.8 mm works well for a heavier, more tactile look</li></ul><h3>Layer Height</h3><ul><li><strong>0.28–0.32 mm</strong></li><li>Use 0.32 mm for smoother ribs and faster prints</li></ul><h3>Line Width</h3><ul><li><strong>120–140% of nozzle diameter</strong><ul><li>0.6 mm nozzle → 0.72–0.84 mm</li><li>0.8 mm nozzle → 0.96–1.12 mm</li></ul></li></ul><h3>Walls</h3><ul><li>1 wall (vase mode)</li></ul><h3>Infill</h3><ul><li>0%</li></ul><h3>Top / Bottom</h3><ul><li>Bottom layers: <strong>4</strong></li><li>Top layers: <strong>0</strong></li></ul><h3>Print Speed</h3><ul><li>Outer wall: <strong>25–35 mm/s</strong></li><li>Taller prints benefit from slower speeds to reduce vibration</li></ul><h3>Temperature</h3><ul><li>PLA: <strong>200–215 °C</strong></li><li>Silk PLA: <strong>210–220 °C</strong></li><li>Matte / stone PLA: usually <strong>+5 °C</strong> over standard PLA</li></ul><h3>Cooling</h3><ul><li>Part cooling fan: <strong>100% after first 5 layers</strong></li><li>Auxiliary fan: <strong>off or low</strong> (printer dependent)</li></ul><h3>Supports</h3><ul><li><strong>None</strong></li></ul><h3>Bed Adhesion</h3><ul><li>Textured PEI works well</li><li>Optional <strong>5–8 mm brim</strong> for extra stability on very tall prints</li></ul><h3>Estimated Print Time</h3><ul><li>~1.5–3 hours depending on height, nozzle, and speed</li></ul><h2>Filament Recommendations</h2><ul><li><strong>Matte PLA</strong> for a ceramic-style finish</li><li><strong>Silk PLA</strong> to highlight the ribbing</li><li><strong>Pastel or muted colours</strong> work especially well for bathroom or interior settings</li></ul><h2>Tips for Best Results</h2><ul><li>Keep acceleration and jerk conservative</li><li>Avoid high-speed modes on tall prints</li><li>Visible layer lines are intentional and part of the design</li></ul>

0.8mm nozzle, 0.2mm layer, 1 walls, 0% infill

<h3>Ribbed Diamond Vase – Sculptural Vase Mode Design</h3><p><strong>Free Commercial Licence Included</strong></p><p>This sculptural vase features a tall, ribbed body with a distinctive hourglass profile and fluted bowl top. The vertical ribs are designed to catch light beautifully, giving the piece a calm but architectural presence that works well as a decorative object or functional vase.</p><p>The model is optimised for <strong>vase mode printing</strong>, keeping prints fast, material-efficient, and visually clean. Layer lines are an intentional part of the design and look especially good in matte, silk, or satin filaments. The wide base provides good stability despite the tall profile.</p><h3>Print details</h3><ul><li>Designed for vase mode / spiralise outer contour</li><li>No supports required</li><li>Prints cleanly on most machines</li><li>Ideal for matte, silk, or stone-style PLA</li></ul><h3>Licence</h3><p>This model is released with a <strong>free commercial licence</strong>.<br>If you boost this model, you are welcome to:</p><ul><li>Print and sell physical copies</li><li>Use it for craft fairs, markets, and small shops</li><li>Include it in your own printed product range</li></ul><p>(Reselling or redistributing the digital file itself is not permitted.)</p><p>Thank you to everyone who boosts, prints, and shares makes — it genuinely helps support new designs and future releases.</p>

Ribbed Diamond Vase – Sculptural Vase Mode Design

ASIA

Print Profile(1)

Description

Ribbed Diamond Vase – Sculptural Vase Mode Design

Print details

Licence

Comment & Rating (0)

License

Related Models