MadeOnce

cover

plate_1.png

2026-01-15_3afb927b761db.jpeg

IMG_1007.jpeg

<h2>Print Profile – Paper / Origami Finish</h2><p>This profile is tuned to <strong>preserve sharp edges</strong> and give the vase its paper-like feel.</p><h3>Print Mode</h3><ul><li><strong>Vase mode / Spiralise outer contour</strong></li></ul><h3>Nozzle</h3><ul><li><strong>0.4 mm (recommended)</strong></li><li>0.6 mm works but softens the facets slightly</li></ul><h3>Layer Height</h3><ul><li><strong>0.2 mm</strong></li><li>This keeps edges crisp without over-rounding</li></ul><h3>Line Width</h3><ul><li><strong>120–125%</strong><ul><li>0.48–0.5 mm ideal</li></ul></li></ul><h3>Walls</h3><ul><li>1 wall (vase mode)</li></ul><h3>Infill</h3><ul><li>0%</li></ul><h3>Top / Bottom</h3><ul><li>Bottom layers: <strong>4</strong></li><li>Top layers: <strong>0</strong></li></ul><h3>Print Speed</h3><ul><li>Outer wall: <strong>20–30 mm/s</strong></li><li>Slower speeds preserve sharp geometry</li></ul><h3>Temperature</h3><ul><li>PLA: <strong>195–205 °C</strong></li><li>Matte PLA works exceptionally well</li><li>Avoid overly glossy filaments if you want a paper effect</li></ul><h3>Cooling</h3><ul><li>Part cooling fan: <strong>100% after first few layers</strong></li><li>Auxiliary fan: off or very low</li></ul><h3>Supports</h3><ul><li><strong>None</strong></li></ul><h3>Bed Adhesion</h3><ul><li>Textured PEI or smooth plate</li><li>Optional <strong>5 mm brim</strong> if printing tall versions</li></ul><h3>Estimated Print Time</h3><ul><li>~3–4 hours depending on height</li></ul>

0.8mm nozzle, 0.2mm layer, 1 walls, 0% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>&nbsp;</p><p><strong>Free Commercial Licence Included</strong></p><p>This vase features a stacked, faceted geometry inspired by folded paper and origami forms. The repeating angular folds create strong highlights and shadows, giving the surface a crisp, architectural appearance that changes depending on the light and viewing angle.</p><p>Optimised for <strong>vase mode printing</strong>, this design produces thin, lightweight walls that feel almost paper-like when printed with the right settings. The sharp edges and layered facets are intentional and look especially striking in light, neutral, or matte filaments.</p><p>The wide, stable base and straight-sided profile make it ideal for dried flowers, grasses, or as a standalone sculptural object.</p><h3>Licence</h3><p>This model includes a <strong>free commercial licence</strong>.</p><p>If you boost this model, you are welcome to:</p><ul><li>Print and sell physical copies</li><li>Use it for craft fairs, markets, and small shops</li><li>Include it in your own printed décor range</li></ul><p>Redistribution of the digital file itself is not permitted.</p><p>Thank you to everyone who boosts, prints, and shares — it directly supports future designs.</p><h2> </h2><h2> </h2>

Print Profile(1)

Description

Licence

Comment & Rating (0)

License