Floor Mounted Sliding Door Guide (8mm door)
Print Profile(1)
Description
Floor-mounted sliding door guide designed for glass or wooden sliding doors.
The inner channel follows the same curved profile as the outer walls, ensuring smooth, silent sliding and reduced wear on the door edge.
Side-mounted screw holes prevent any contact between fasteners and the door.
Technical details
- Inner channel width: 9 mm
- Tested door thickness: 8 mm (glass)
- Total width: 19 mm
- Length: 45 mm
- Inner channel height: 10 mm
- Total height: 23 mm
- Side screw holes: 4 mm
Mounting options
- Screws (recommended for permanent installation)
- Silicone adhesive (tested, no drilling required)
Print recommendations
- Material: PETG or PLA+
- Layer height: 0.2 mm
- Walls: 3–4
- Infill: 25–30%
- Supports: NO
Notes
Designed for light to medium-weight sliding doors.
Test fit before permanent installation.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)